How to troubleshoot Windows Group Policy issues

Case(s)



You face an issue with Group Policy Objects (GPO) processing and application in your Windows environment. As always, running a Root Cause Analysis to determine the root cause of the issue is of paramount importance before proceeding further with group policy troubleshooting.



Solution



First you need to have a basic understanding of the GPO underlying execution engine in Windows operating systems. You can refer to this article for details on the components and operations of Windows Group Policy (group policy engine and client-side extensions).





If the issue(s) are related to domain group policy, the following steps must be followed:



- Before anything else, you need to be 100% certain that your underlying GPO execution engine and your AD domain controllers are running without issues. This means running dcdiag, repadmin and other tools to ensure that your AD replication and DNS resolution is working ok.

- Make use of gpmc.msc (mmc-based Group Policy Management Console) and/or the Windows Admin Center).



- Check the GPO configured policies (computer, user) and if the GPO is linked to the correct OU, especially if you have loopback processing configured in your environment.

- Are you using group policy central repository or local repository on the AD domain controllers? Check that your clients can access the Group Policy repository path and that there are no network or file permissions-related issues.

- Ensure that your Windows and other 3rd party firewall is configured to allow firewall ports required by the GPO engine to work properly. To ensure that there is no firewall-related issue, try running the "Group Policy Update" command. If this is successful then you are good to go. Otherwise you need to resolve any client failures first.



- Check the GPO inheritance blocking settings.

- Check the GPO "enforced" setting and the GPO precedence rules (local, site, domain, OU).

- Check the GPO security filtering settings and WMI filtering.

- Chekc the GPO permissions delegation tab.

- Run gpresults at server-side and client-side

- Check the event viewer group policy section at the client side.

- Generate and review the GPO client and server logs for further troubleshooting. You need to enable and review the gpsvc.log. Open the registry and navigate to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersion. Then create a new key named "Diagnostics". Under this folder create a new REG_DWORD and name it GPSvcDebugLevel, modify it and In the Value data box, type “30002”, make sure it’s “Hexadecimal.” The gpsvc.log file should be created under folder %windir%debugusermode folder. You may need to reboot the client machine or run gpupdate /force in order for the folder/file to be created for the first time.

If the issues are entirely related to local group policy then the troubleshooting efforts should be focused on the specific machine(s) which are affected at a local OS level by running gpedit.msc.





Last but not least, refer to the Group Policy troubleshooting guide for more troubleshooting suggestions. Pay extra attention to the client and server log files troubleshooting section of this guide.



References



https://social.technet.microsoft.com/wiki/contents/articles/38043.group-policy-basic-troubleshooting-steps-for-beginners.aspx?Redirected=true



https://docs.microsoft.com/en-us/archive/blogs/musings_of_a_technical_tam/group-policy-basics-part-3-how-clients-process-gpos


https://stefanos.cloud/blog/kb/how-to-troubleshoot-windows-group-policy-issues/

Comments

Post a Comment

Popular posts from this blog

Acronis Cyber Protect 15 virtual machine backup not working when using shared mode virtual disks vhds

Image
Case When you apply and run an Acronis Cyber Protect backup against a virtual machine which is part of a guest cluster which makes use of virtual disk shared files of type .vhds (VHD Set), you run across the following error. Activity succeeded with warnings. Activity 'Preparing for backup of virtual machine' succeeded with the following warning 'Windows error: (0xC05CFF0A). The requested operation cannot be performed on the virtual disk as it is currently used in shared mode. Or the error may state something along the lines of: "Failed to open virtual disk file '.vhds'. Unknown format of the virtual disk." The same error as above can occur in virtual machine backup of virtual machines which include a .vdhx shared disk. Solution The above error is by design when you are attempting a virtual machine backup to virtual machine which does not have an Acronis backup agent installed, as per https://kb.acronis.com/content/68573 . According to Acronis, as of July 2
Read more

How to perform hardware health checks in Windows

Image
Case You need to perform an overall hardware health check in a Windows machine, running either a Windows client or a Windows Server operating system. This article provides guidance on the steps to carry out to perform hardware health checks in Windows. Solution Carry out the steps below. - Thoroughly check all Windows event logs (Application, System, Security) for any warnings or errors which may be related to issues you are experiencing with your Windows machine. - Check the device management mmc console by running devmgmt.msc. Ensure that you choose to show all hidden devices from the View menu. If you notice any exclamation marks next to any device, you will need to re-install its driver from the respective manufacturer to ensure that there afterwards no warnings in the device management console. - Check the health of all your disks , either HDD or SSD. Follow instructions in the following KB article for steps to follow to check your disk health: https://stefanos.cloud/kb/how-to-ch
Read more

How to resolve Group Policy error codes 8007071a and 800706ba

Image
Case You are running "Group Policy Update" on an OU inside the Group Policy Management Console in Active Directory but you are receiving RPC errors from your servers or domain-joined workstations, as shown in the example below. After a Group Policy Update, you come across Group Policy error codes 8007071a and 800706ba. This means that the local Windows Firewall is not configured properly to allow Group Policy (GPO) traffic. GPO traffic an be either remote GPO update or remote GP Resultant Set of Policy (RSOP) operations. Solution Option 1 Run gpedit.msc and create a new local group policy object which implements the following policies under Local Computer Policy --> Computer Configuration --> Windows Settings --> Security Settings --> Windows Defender Firewall --> Inbound Rules : The full configuration is shown below. After the above local group policies are configured on each domain server and workstation, you can start applying group policy objects to the dom
Read more